It has been my experience in a decade of carving and engraving on a HUGE variety of materials. Lasers can carve a glass-like surface on a Brick either concrete, stone, or clay but can only do so at a depth of about 1/32 -1/16 of an inch of depth. That will limit the amount of wear it can take on a surface that is getting foot traffic or regular wear. I sand-carve from about a 1/8 - 5/16 depth so that the carving is well below the traffic usage on the surface and stands up much better over the long run and life of the brick. 

​

Our pavers can be used indoors or out. They can lie on their backside, stand on the edge, or be installed with other pavers in a walkway or patio. Concrete pavers will last for generations, and the red pavers do not fade or discolor and have a unique patina that becomes more beautiful with age. It is guaranteed to last for many years to come.

​

Paver size: 12" x 12" x 1-1/2" Approximatly 16lb 8oz
 *Paver Brick with no lugs, Flat top surface with some imperfections.
 *1/4" Beveled Top Surface and no Lugs on Sides.
 *Engraved with up to 8 lines, with options for clipart at an extra cost.
 *30 characters max per line (including spaces)